From Lab to Production Line.
We Build the Stage.
Physical products need physical presence. From chemical compounds to medical devices to heavy machinery — we engineer stands that showcase what you make.
From Lab to Production Line.
We Build the Stage.
Physical products need physical presence. From chemical compounds to medical devices to heavy machinery — we engineer stands that showcase what you make.
From Lab to Production Line.
We Build the Stage.
Physical products need physical presence. From chemical compounds to medical devices to heavy machinery — we engineer stands that showcase what you make.
Your Product Is Complex.Your Exhibition Planning Shouldn't Be.
What connects chemistry, construction, medical technology, and mechanical engineering? Physical products that need to be seen, touched, and demonstrated. We build the stands that make that possible.
When Your Exhibition Partner Thinks Like an Engineer.
Technical Integration Chaos
Power, compressed air, and data cables treated as an afterthought. Three-phase connections ordered too late. The machinery works — but the cables are zip-tied to the ceiling.
We plan three-phase power (400V/125A), compressed air, cooling water, and data networks from the first sketch. Integrated into the architecture, not bolted on afterwards.
Logistics Nightmares
Your 12-ton injection molder needs crane access, reinforced flooring, and a precise delivery window. Your builder planned for standard setup.
Crane bookings, specialist transport, delivery sequencing — coordinated months in advance. The stand shell is ready before your machines arrive. Wiring stays accessible after placement.
The Warehouse Effect
All budget goes to getting the machines there. The stand is an afterthought — white walls, fluorescent lights, cable trays. Your €500K product looks like it's in a shipping container.
Your machine is the star. We build the stage it deserves — clean cable routing, premium materials, integrated lighting that frames your product, not just illuminates it.
Safety & Compliance Gaps
Running machinery without proper safety perimeters. Chemical samples without hazmat documentation. Load-bearing never verified with the venue. You find out at build-up — not during planning.
Mandatory demo zones, hazmat documentation, electrical certification, and structural load reports — submitted to venue authorities before build-up. We know the rules at Düsseldorf, Frankfurt, Hannover, and Munich.
When Your Exhibition Partner Thinks Like an Engineer.
Power, compressed air, and data cables treated as an afterthought. Three-phase connections ordered too late. The machinery works — but the cables are zip-tied to the ceiling.
We plan three-phase power (400V/125A), compressed air, cooling water, and data networks from the first sketch. Integrated into the architecture, not bolted on afterwards.
Your 12-ton injection molder needs crane access, reinforced flooring, and a precise delivery window. Your builder planned for standard setup.
Crane bookings, specialist transport, delivery sequencing — coordinated months in advance. The stand shell is ready before your machines arrive. Wiring stays accessible after placement.
All budget goes to getting the machines there. The stand is an afterthought — white walls, fluorescent lights, cable trays. Your €500K product looks like it's in a shipping container.
Your machine is the star. We build the stage it deserves — clean cable routing, premium materials, integrated lighting that frames your product, not just illuminates it.
Running machinery without proper safety perimeters. Chemical samples without hazmat documentation. Load-bearing never verified with the venue. You find out at build-up — not during planning.
Mandatory demo zones, hazmat documentation, electrical certification, and structural load reports — submitted to venue authorities before build-up. We know the rules at Düsseldorf, Frankfurt, Hannover, and Munich.
When Your Exhibition Partner Thinks Like an Engineer.
Power, compressed air, and data cables treated as an afterthought. Three-phase connections ordered too late. The machinery works — but the cables are zip-tied to the ceiling.
We plan three-phase power (400V/125A), compressed air, cooling water, and data networks from the first sketch. Integrated into the architecture, not bolted on afterwards.
Your 12-ton injection molder needs crane access, reinforced flooring, and a precise delivery window. Your builder planned for standard setup.
Crane bookings, specialist transport, delivery sequencing — coordinated months in advance. The stand shell is ready before your machines arrive. Wiring stays accessible after placement.
All budget goes to getting the machines there. The stand is an afterthought — white walls, fluorescent lights, cable trays. Your €500K product looks like it's in a shipping container.
Your machine is the star. We build the stage it deserves — clean cable routing, premium materials, integrated lighting that frames your product, not just illuminates it.
Running machinery without proper safety perimeters. Chemical samples without hazmat documentation. Load-bearing never verified with the venue. You find out at build-up — not during planning.
Mandatory demo zones, hazmat documentation, electrical certification, and structural load reports — submitted to venue authorities before build-up. We know the rules at Düsseldorf, Frankfurt, Hannover, and Munich.
“At the DGS Congress, we needed short-notice flexibility on the patient stand – Public Address handled it with complete confidence. As always, high quality and simply a pleasure to work with.”
One Person.
One Hundred Behind.
One project manager coordinates crane bookings, specialist transport, three-phase power installation, and on-site build-up across multiple venues. Behind them: over 100 specialized supplying partners who understand structural engineering, heavy logistics, and venue-specific safety regulations. Your machines arrive on time because one person owns the entire chain — backed by three decades of industrial exhibition experience.
Your Project Manager
One dedicated contact who coordinates machinery logistics, venue authorities, and supplying partners. Owns every deadline and every delivery window.
Load calculations, reinforced substructures, vibration isolation
Metal, wood, electronics, rigging — specialists for every discipline
Crane bookings, specialist transport, delivery sequencing
Three-phase power, compressed air, cooling, data networks
Trusted local partners from Düsseldorf to Shanghai
One Person.
One Hundred Behind.
One project manager coordinates crane bookings, specialist transport, three-phase power installation, and on-site build-up across multiple venues. Behind them: over 100 specialized supplying partners who understand structural engineering, heavy logistics, and venue-specific safety regulations. Your machines arrive on time because one person owns the entire chain — backed by three decades of industrial exhibition experience.
Your Project Manager
One dedicated contact who coordinates machinery logistics, venue authorities, and supplying partners. Owns every deadline and every delivery window.
Load calculations, reinforced substructures, vibration isolation
Metal, wood, electronics, rigging — specialists for every discipline
Crane bookings, specialist transport, delivery sequencing
Three-phase power, compressed air, cooling, data networks
Trusted local partners from Düsseldorf to Shanghai
Our Reference Projects
See how we've engineered exhibition stands for industrial clients — from heavy machinery demos to chemical product showcases across Europe's leading trade fairs.
Engineered for Safety.
Built for Reuse.
From fire codes to rigging points — we know the rules before you brief us.
A partner you can name in your CSRD report.
Engineered for Safety.
Built for Reuse.
From fire codes to rigging points — we know the rules before you brief us.
A partner you can name in your CSRD report.
Built for Manufacturing.Across Sectors.
We work with chemical producers, mechanical engineers, med-tech manufacturers, and construction companies across Germany and internationally.
Questions About
Industry & Manufacturing.
Real questions from real industrial exhibition projects. If yours isn't here, let's talk.
Get in TouchHow do you handle heavy machinery on exhibition stands?
We start with structural engineering — load-bearing calculations, reinforced substructures, and vibration isolation systems. We coordinate crane access and delivery windows with the venue months in advance. When your 15-ton machine arrives, the stand is ready for it.
What power and infrastructure can you provide?
Everything from standard exhibition power to three-phase 400V/125A connections, compressed air lines, cooling water circuits, and high-bandwidth data networks. All integrated into the stand architecture — cleanly routed, not cable-tied to the ceiling.
Can you manage the full logistics chain, not just the stand?
Yes. Heavy transport coordination, crane bookings, specialist delivery sequencing, and on-site technician scheduling are part of our project management. Your machines come from different factories, different countries — we make sure everything arrives in the right order.
How do you handle hazardous materials and chemical samples on stands?
We know the venue-specific regulations — quantity limits, safety data sheet submissions, fire authority approvals, fume extraction requirements. This is handled proactively during planning, not discovered during build-up.
What build-up time do industrial stands typically need?
More than standard exhibition stands. Machine installation requires specialist technicians and precise sequencing — the stand shell must be complete before machines arrive, but infrastructure must remain accessible. We plan 4-7 day build-ups as standard for industrial clients.
Can you store and reuse our stand system across multiple fairs?
Yes. System-built aluminium stands are designed for reuse across 5-10+ fairs. We handle storage, maintenance, and adaptation between events. Many industrial clients exhibit at 4-8 fairs per year with variations of the same concept.
We exhibit internationally. Can you coordinate across countries?
Through our international partner network, we deliver consistent brand presence from Hannover to Shanghai. One PM, one design language, local execution. We're a member of IFES — we can activate trusted partners in any market.
Industry & Manufacturing.
Real questions from real industrial exhibition projects. If yours isn't here, let's talk.
Get in TouchHow do you handle heavy machinery on exhibition stands?
We start with structural engineering — load-bearing calculations, reinforced substructures, and vibration isolation systems. We coordinate crane access and delivery windows with the venue months in advance. When your 15-ton machine arrives, the stand is ready for it.
What power and infrastructure can you provide?
Everything from standard exhibition power to three-phase 400V/125A connections, compressed air lines, cooling water circuits, and high-bandwidth data networks. All integrated into the stand architecture — cleanly routed, not cable-tied to the ceiling.
Can you manage the full logistics chain, not just the stand?
Yes. Heavy transport coordination, crane bookings, specialist delivery sequencing, and on-site technician scheduling are part of our project management. Your machines come from different factories, different countries — we make sure everything arrives in the right order.
How do you handle hazardous materials and chemical samples on stands?
We know the venue-specific regulations — quantity limits, safety data sheet submissions, fire authority approvals, fume extraction requirements. This is handled proactively during planning, not discovered during build-up.
What build-up time do industrial stands typically need?
More than standard exhibition stands. Machine installation requires specialist technicians and precise sequencing — the stand shell must be complete before machines arrive, but infrastructure must remain accessible. We plan 4-7 day build-ups as standard for industrial clients.
Can you store and reuse our stand system across multiple fairs?
Yes. System-built aluminium stands are designed for reuse across 5-10+ fairs. We handle storage, maintenance, and adaptation between events. Many industrial clients exhibit at 4-8 fairs per year with variations of the same concept.
We exhibit internationally. Can you coordinate across countries?
Through our international partner network, we deliver consistent brand presence from Hannover to Shanghai. One PM, one design language, local execution. We're a member of IFES — we can activate trusted partners in any market.
Questions About
Industry & Manufacturing.
Real questions from real industrial exhibition projects. If yours isn't here, let's talk.
Get in TouchHow do you handle heavy machinery on exhibition stands?
We start with structural engineering — load-bearing calculations, reinforced substructures, and vibration isolation systems. We coordinate crane access and delivery windows with the venue months in advance. When your 15-ton machine arrives, the stand is ready for it.
What power and infrastructure can you provide?
Everything from standard exhibition power to three-phase 400V/125A connections, compressed air lines, cooling water circuits, and high-bandwidth data networks. All integrated into the stand architecture — cleanly routed, not cable-tied to the ceiling.
Can you manage the full logistics chain, not just the stand?
Yes. Heavy transport coordination, crane bookings, specialist delivery sequencing, and on-site technician scheduling are part of our project management. Your machines come from different factories, different countries — we make sure everything arrives in the right order.
How do you handle hazardous materials and chemical samples on stands?
We know the venue-specific regulations — quantity limits, safety data sheet submissions, fire authority approvals, fume extraction requirements. This is handled proactively during planning, not discovered during build-up.
What build-up time do industrial stands typically need?
More than standard exhibition stands. Machine installation requires specialist technicians and precise sequencing — the stand shell must be complete before machines arrive, but infrastructure must remain accessible. We plan 4-7 day build-ups as standard for industrial clients.
Can you store and reuse our stand system across multiple fairs?
Yes. System-built aluminium stands are designed for reuse across 5-10+ fairs. We handle storage, maintenance, and adaptation between events. Many industrial clients exhibit at 4-8 fairs per year with variations of the same concept.
We exhibit internationally. Can you coordinate across countries?
Through our international partner network, we deliver consistent brand presence from Hannover to Shanghai. One PM, one design language, local execution. We're a member of IFES — we can activate trusted partners in any market.
Your Next Exhibition Is
Coming.
Tell us about your project — we'll show you how we've engineered it before.
How We Work
When concept, design, production, logistics, and onsite support come from one team, nothing falls through the cracks.
Find Out MoreExhibition Agency
We design the visitor journey through your space — where people enter, what they see first, how they experience your brand.
Find Out MoreRealisation
From production coordination to on-site build — your project manager delivers while you focus on your visitors.
Find Out MoreCustom Exhibits
From a functional lung model to interactive product displays — exhibits that don't just show your product, they make people understand it.
Find Out MoreHow We Work
When concept, design, production, logistics, and onsite support come from one team, nothing falls through the cracks.
Exhibition Agency
We design the visitor journey through your space — where people enter, what they see first, how they experience your brand.
Realisation
From production coordination to on-site build — your project manager delivers while you focus on your visitors.
Custom Exhibits
From a functional lung model to interactive product displays — exhibits that don't just show your product, they make people understand it.
How We Work
When concept, design, production, logistics, and onsite support come from one team, nothing falls through the cracks.
Exhibition Agency
We design the visitor journey through your space — where people enter, what they see first, how they experience your brand.
Realisation
From production coordination to on-site build — your project manager delivers while you focus on your visitors.
Custom Exhibits
From a functional lung model to interactive product displays — exhibits that don't just show your product, they make people understand it.